How To Make A Wooden Weather Vane For Patio?

We all love a house that has a patio. And if you want to add a weather vane in it, it would look cozier. And if you know how to make a wooden weather vane for patio, it will give you some advantages.

To make the wooden weather vane, you need to make an arrow using balsa and a square dowel.  Then attach the dowel to the wooden base. You can add the initials of directions to complete the weather vane.

Patios are open spaces. So, the cheap way to have a weather vane for it is to make it yourself at home. And making a weather vane is easier than you think.

How To Make A Wooden Weather Vane For Patio?

Patios don’t have any walls. And in most cases, they don’t even have a roof. So how would you make and set up a weather vane for a patio? You can build a weather vane from discarded stuff around you and set it up on the patio table. Follow these steps to make your weather vane.

Things You Will Need

  • ¾ by ¾ inch square dowel – a 12 inches piece
  • ¼ inch balsa or luan plywood – It has to be large enough to cut two shapes out of it
  • Scroll saw
  • 1-⅛” round dowel
  • Sandpaper
  • Glue
  • 4″ nail
  • 3D nail
  • Hammer
  • Drill
  • Washer
  • Paint/stain and varnish
  • Paintbrush
  • Wooden letters, attached to wooden straws or 1-¼” round dowel

Step 1: Sketch A Triangle

Take an average piece of balsa or luan. Sketch a triangle with four inches sides. Then, sketch a trapezoid on the plywood. The longest part will be five inches, and the shortest should be three inches.

Step 2: Using Scroll Saw

Use a scroll saw to do that. Don’t worry about cutting the shape a little unevenly. You can work on fixing it in the next step.

Step 3: Sanding The Edges

Next, use sandpaper to sand the edges of both shapes. Sand both sides of the triangle as well. It will help reduce the wood’s width a little.

Step 4: Cutting Slits & Dabbing Glue

Again take the scroll saw and cut a slit on each end of the square dowel. The slit should be about half an inch or enough to slide the balsa shapes.

Dab some glue in the dowel slits and insert the wood shapes in them. Let the glue dry for a little. Now, your weather vane arrow is ready.

Step 5: Hole In The Centre

Mark the centre of the dowel and drill a hole in it. Make sure that the hole is not larger than the 3D nail. Otherwise, the nail’s head will slip off the dowel.

Step 6: Varnishing

Paint or varnish all the wooden parts. Don’t forget to paint the 1-⅛ inches dowel you have kept for mounting the arrow. Make sure the hole in the dowel doesn’t get filled.

Step 7: Inserting 3D Nail

Once the paint or varnish dries, put the washer at the end of the 1-¼ inches dowel. Insert the 3D nail with a hammer through the washer into the 1-⅛ inches round dowel. You must leave about 1/16 inches of clearance between the nail and dowel top.

Step 8: Attaching To Base

Attach the dowel to a ball or post base. The base must not move. Then crew the letters with shorter dowels to the base clockwise as N, E, S, and W. Finally, your weather vane is ready to be outside.

Lets, check a video

How Does A Weather Vane Work?

Weather vane works with all its parts. And understanding how it works will help you read the weather vane correctly. Here are the features through which a weather vane works.


The design plays a vital role in pointing toward the wind’s direction. The weather vane free-spinning pointer moves when the wind changes direction. It has a pointy head, and the back is thick. The design helps the arrow move freely with the wind.


Without proper balance, the pointer or arrow will not move freely. It will either get stuck now and then or won’t move at all.


The pointer of the weather vane points to the direction the wind is blowing from. And the pointer’s thick side will be towards the direction the wind is blowing to.


You already know how a weather vane works. So stand back and observe for a while, and you will know the answer. Once you learn about the wind’s directions, you may end up predicting upcoming weather conditions.

Frequently Asked Question

Q. What Is A Weather Vane Used For?

From ancient times weather vanes have been used to tell the direction of the wind. It helped the people of ancient times to understand the weather.

Nowadays, weather vane can be seen in rural areas. They are still used as a tool to know the wind’s direction. Besides, weather vanes are also used for decorative purposes.

Q. Where Else Can I Install A Weather Vane?

Though most people prefer installing a weather vane on top of their house or any building, there’s no particular rule for that. You can install a weather vane anywhere you choose.

You can install it on the highest point of your house, shed, barn, or garage. You can also set it up on the ground. But make sure that the weather vane is at least three feet above the ground.

Q. Can I Install A Weather Vane Without A Cupola?

Yes, you can. It is not mandatory to have a cupola to install a weather vane. People often add both cupola and weather vane on their rooftop to bring a rustic charm to the property. It also helps the weather vane to stand out more.

But don’t worry if you don’t have a cupola. You can still install the weather vane on the highest point of your rooftop to make it eye-catching. I would suggest you use a weather vane that comes with a broader design.


Weather vane broadens the classiness of any house or place. And adding one to your patio brings a lovely vibe. Knowing how to make a wooden weather vane for patio helps you understand how the weather vane works. It also brings out your creative side.

And as you have learned how easy it is to make a weather vane, I’m sure you’ll enjoy making more if needed. The measurements don’t need to be exactly how much I’ve mentioned here. You can always use your assumption to build the perfect weather vane on your own.